With the rapid advancement of science and technology, various new materials have emerged in an endless stream, especially in the recent years, polymer materials have developed rapidly. As a branch of plastic, various properties have been significantly improved, and in some areas there has been a tendency to replace wood and metal materials. In order to make plastic materials and their products safe and reliable, it is necessary to test their performance. Among them, mechanical property testing is one of the most important tests.
The following describes several test machines as a reference:
1. Conventional electronic universal material testing machine
This type of testing machine is the mainstream product of today's universal material testing machine. It uses servo motor as the power source, screw and nut as the actuator, and realizes the speed control of the moving beam of the testing machine. It is easy to operate and does not require the tester. High, the test stroke can be arbitrarily customized as needed. Although the control method is relatively simple, only the speed is a control method, but its control precision and control range are very wide and wide. Taking Kehui company testing machine as an example, its speed adjustment range can reach 0.001mm/min~1000mm/min, stepless speed regulation, control precision can reach 0.5, and small tonnage model is easy to implement. When the coefficient of friction is used, the full load is only 5N. It has great configuration flexibility, and can be equipped with different tonnage sensors, fixtures and accessories to achieve multi-purpose, complete the functions of pulling, pressing, bending, shearing, peeling, tearing, friction coefficient and torsion. Throughout the relevant standards for the testing of mechanical properties of plastics, almost all the requirements for the control mode of the testing machine are speed control. Therefore, no matter from the control mode or the speed range, the test stroke and the tonnage of the testing machine, this type of machine is plastic mechanics. The first choice for performance testing.
2, three closed-loop electronic universal material testing machine
This type of testing machine has the advantages of wide speed range, large test stroke and flexible configuration, and the advantages of electro-hydraulic servo test force, displacement and deformation control. Therefore, it is a kind of testing machine with better performance, but the stability of the machine is closely related to the rigidity of the main machine and the rigidity of the sample due to the force control and deformation control. Generally, the test machine for plastics has a small tonnage, so the rigidity of the main machine is low, and the rigidity of the sample itself is not too large. Therefore, this type of test machine rarely has a model of 10KN or less, while the model of 10KN or less is a plastic type. most commonly used. It is said that the stability of this type of machine is related to the sample. If the sample is single, the test method is also single, and it can be used. Otherwise, the control parameters of the test machine need to be adjusted at any time (that is, the conventional P, I, D Parameter), which is almost unimaginable for non-automatic control professionals. Therefore, from the overall point of view, in addition to the specific requirements of the control method, it is not easy to choose the test of plastic materials.
3, simple electric pull
Since the tensile strength of plastic is a very important indicator for testing the mechanical properties of plastics, in the past few years, there were not many types of plastics, and the application was not very wide. The mechanical properties of plastics were still relatively simple, and the corresponding standards were also Not very perfect. In this period, a structure is very simple, the use is very simple, and the performance index is very lacking, but the single-purpose tensile test machine with a motor as a power source is commonly used as a power source. As the name suggests, it can only be used for a single tensile test, and the data that can be processed is very limited, and the control measurement accuracy is relatively low. Now, although it is still used in some occasions, it has gradually become a single function. Eliminated for the market.
4, electro-hydraulic servo universal material testing machine
This kind of testing machine is a kind of testing machine with better performance at present. Because it adopts electro-hydraulic servo control technology, it can realize closed-loop control of force, displacement and deformation, and has good control performance. At present, metal, building materials and the like require constant stress, constant strain and need to carry out creep test. However, due to the limitation of the flow rate of the oil source, his test speed is low. In order to increase the rigidity of the system and ensure the stable operation of the closed-loop control, the stroke of this type of testing machine is small, and the operation is complicated. It is difficult to expand the configuration, and there are few models below 10KN, so it is not suitable for the testing of plastic rubber materials.
Our safety grating create safer working conditions across a variety of industrial environments. Some of the industries that benefit from using our products in the construction of their walkways, ladders, stairs, ramps.
Stair treads metal grating offers a number of advantages. The material provides greater strength, reliability, and flexibility, qualities that make it well-suited for use in critical structures, such as stairs, ducting, roofing, and more.
hot rolled, cold rolled, aluminum, galvanized plate,
stainless steel panel etc.
Anti-skid plate can be widely used in sewage treatment, power plant,
snow, stair step, antiskid pedal, and many other anti-skid areas.
Our safety grating provides a lightweight but durable surface that reduces the risk of slipping. It is suitable for use in many crane components, including the stairs, walkway, and operating platform.
The material offers durability and slip resistance-even when exposed to harsh road conditions, such as rain, snow, sleet, and dust-qualities that help ensure the safety of workers during loading and unloading operations.
Safety grating is used for many truck body components, including steps, flooring, and work platforms.
Features:
Corrosion resistance, Rust resistance.
Anti-slip resistance, Good air circulation.
Good drainage performance, Easy to install and uninstall.
High strength-to-weight performance,Durable and long lifespan.
--- PRODUCT SPECIFICATIONS---
Material
Hole patterns
crocodile mouth, round raised hole, tears shape etc.
Thickness
generally 2mm, 2.5mm, 3.0mm
Height
20mm, 40mm, 45mm, 50mm, customized
Length
1m, 2m, 2.5m, 3.0m, 3.66m
Production technique
punching, cutting, bending, welding
Use
Safety Grating,Aluminum Safety Grating,Heavy Duty Safety Grating,Galvanized Safety Grating
HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayimesh.com