The National Energy Administration announced on the 30th that as of June 30 this year, the country has shut down 7,467 small thermal power units, with a total capacity of 54.07 million kilowatts. The task of shutting down small thermal power units was completed one and a half years ahead of schedule. Accumulated savings of 160 million tons of raw coal.
A year and a half before the completion of the "Eleventh Five-Year" shutdown task, the cumulative saving of raw coal 1600 million tons of 54.07 million kilowatts of small thermal power units shut down, so that China's thermal power installed capacity structure has been optimized. By the end of June this year, the proportion of thermal power units with a unit of more than 300,000 kilowatts in China reached 64%, which was 20% higher than the initial period of the “Eleventh Five-Year Planâ€. The average coal consumption of thermal power units has dropped to 340 grams per degree, compared with “11. At the beginning of the five-year period, it was reduced by 30 grams, and the cumulative saving of raw coal was 160 million tons.
Hao Weiping, deputy director of the Power Department of the National Energy Administration, said that although the state sent more than 400 people to conduct on-site inspections during the shutdown process, the units were unrecoverablely removed one by one. However, there are very few companies, and professional teams are required to restore the unit.
Hao Weiping said: "After this incident was discovered, the Ministry of Supervision led the team and the National Energy Administration formed a special investigation team. Finally, seven comrades of the enterprise, the local government, and the local management department were severely punished. After discovering this situation, The shut down units were removed from the list of shutdowns. This is not included in the current list of more than 54 million kilowatts.
Energy-saving emission reduction and economic development go hand in hand Sun Qin, deputy director of the National Energy Administration, said that the shutdown of small thermal power plants is a measure of “big and smallâ€, which will not adversely affect the current economic development and future power supply.
Sun Qin said: "In the past few years, we have shut down 50 million kilowatts. The newly built units, especially the low-carbon units including clean energy, are increasing. Now we have about 70 million kilowatts of new units each year. Therefore, in the financial crisis. During the period of easing the supply and demand of electricity, we will seize the opportunity and make adjustments to ensure that we can maintain growth and adjust the structure."
The resettlement of nearly 400,000 employees involved in shutting down small thermal power is being solved. Although the total number of closed targets in the “Eleventh Five-Year Plan†has been completed, half of the provinces have not completed the “Eleventh Five-Year†shutdown. Sun Qin said that the next shutdown task is very difficult, such as personnel placement issues, debt issues, asset relationships, etc.:
Sun Qin said: "The most difficult thing is to shut down the resettlement of small thermal power companies. According to preliminary statistics, nearly 4,000 of us have more than 7,000 units involved in shutting down. The structural adjustment involves where the money comes from. Where is the person going, this is the most crucial issue. The central government’s policy specifically puts forward incentive policies and compensation requirements for shutting down small thermal power. The central government also specializes in some remote and difficult provinces, and adjusts the structure and resettlement in enterprises. Workers, laid-off training and other aspects have given 2 billion funding arrangements."
Sun Qin said that in August this year, the National Energy Administration will hold a national power work conference to further improve supporting measures, and at the same time, together with local and large enterprises, agree on the next step of shutting down.
Measuring wheel also called mechanical ranging car or digital distance measuring wheel.it is widely used to measuring distance in professional surveying and mapping work,road engineering, landscape planning and design,golf course and lanes ect.
The instruction of digital measuring wheel
Please read this instruction before you use the product
Thanks you for choosing our product. This instrument is a new length measuring instrument, it is easy to use,stable and reliable.
The main features:
You could convert the unit between metric and foot; The data could be stored and extracted; The touch switch of the digital measuring wheel is anti-water; The handle which could adjust the height of the instrument is easy to apply. The wheel wrapped with rubber could help to avoid slipping so that the measuring data is more precise.
1.The main parts (From up to down):
Handle
Data display panel
Battery cover
Handle lock
Measuring wheel
Kickstand
2. Technical data:
A. It could measure up to 99999.9m/ft.
B. Accuracy:+/- 0.3%
C: Minimal display :0.1m
D: Power supply 3V (2xAAA LR003)
E: Suitable temperature for use : -10c°~45c°
3. Button and Operation
CLR: Clearance
SM : Store the data
ON/OFF: Switch
Rm: Extra the data
M/ft: Conversion between metric and foot
Data display panel
Power supply
The stored data
The displayed data
Metric
Foot
1. ON/OFF : Switch.
2. m/ft: it means the conversion between metric and foot. If you select (m), the displayed data is based on metric. If you select (ft) ,the displayed data is based on foot.
3. SM: Store the data. You could save the data that shows on the display panel by pressing this button. It could store 5 records that respectively show on M1, M2,M3, M4, M5.( Refer to Table 1)
Before storing After storing Full of the memory
(Table 1)
4. RM: Extract the stored data from SM. For example, if you have already stored the measuring data 5M as M1, 10M as M2. But now the measuring data is 120.7M, you could press the bottom RM once then the digital display panel will shows the the data of M1. The top right of the display panel shows [R". The data of the digital display panel will return to the present data after two seconds. ( Refer to Table 2). If you press the RM twice, the data of the M2 will show on the display panel, the [R" also is on the top right. The data of the digital display panel will return to the present data again after two seconds.
Present data Press the RM Once After 2 seconds
(Table 2)
Present data Press the RM twice After 2 seconds
(Table 3)
5. CLR: Clearance. Once you press this button, the present data will be deleted.
4.Precautions for use
Please open the handle lock to adjust the suitable height of this instrument at first and then close it before using the instrument. Put away the kickstand and turn on the power. Put the wheel on the road to be measured when the data is 0.0m on the digital display panel. Please press the bottom CLR if you want to delete the present data.
1. Please go straight if you want to measure a straight line to ensure the accuracy of the measurement.
2. Do not measure uneven surfaces because it will reduce the accuracy.
3. Do not measure in the rain for a long time.
4. Do not use the instrument under the high temperature environment or keep this product in the high temperature place.
5. Please open the battery cover by using the cross-head screwdriver and change the battery when the digital display panel is dark.
6. Do not deal with the used batteries by yourself, please send them to the government designated place where to recycle them.
7. Please remove the battery and clean the instrument by use the mild detergent to prevent rust if you haven`t used it for a long time. Then please pack it well and save it in the rough place.
8. Do not use benzene solution to clean the instrument, otherwise its surface will be corroded.
9. Do not use this the instrument as a toy for child for avoiding unnecessary damage.
Measuring Wheel,Measuring Wheel Walking,Wheel Measuring Tool
Wintape Measuring Tape Company , https://www.wintapetapemeasure.com