6 minutes to the smartphone full of batteries using organic molecular materials

Israeli start-up StoreDot disclosed a new battery technology at the "Mobile World Congress 2015" (Barcelona, ​​Spain, March 2-3, 2015) at the Israel Pavilion, which can fully charge the smartphone in 6 minutes. It takes 1 hour.

StoreDot developed a secondary battery called "FlashBattery" and a dedicated charger. FlashBattery includes the "X20" and "X100" products, which can deliver approximately 20 times and 100 times the current capacity of ordinary lithium-ion secondary batteries, respectively. Both products have a charging voltage of 5V. According to reports, the X20 with 2800mAh battery capacity can be charged in 6 minutes. The X100 has a battery capacity of 1400mAh and can fully charge the smartphone in 1 minute. I actually watched the X20's charging demonstration. It only took 10 seconds to increase the charge from 15% to 20%. It is reported that if you charge in a linear manner, it takes 200 seconds to complete the charge.

StoreDot did not disclose FlashBattery's storage materials and electrode materials. It is reported that it is manufactured after synthesizing organic molecular materials. Moreover, FlashBattery is also environmentally friendly, and it is less combustible than lithium-ion secondary batteries in both construction and materials. FlashBattery will be used for commercial products by the end of 2015. Lithium-ion secondary batteries have a charge-discharge cycle life of about 500 cycles, and X20 and X100 have more than 1,500 cycles. In the future, StoreDot plans to increase the X20's battery capacity at the same speed as lithium-ion secondary batteries while increasing the speed of charging.

Still developing thinner films than quantum dot wavelength conversion materials

StoreDot is also developing a wavelength conversion material "MolecuLED" that counters quantum dots using organic molecular materials. Alan Weisleder, senior vice president of business development at StoreDot, said, "MolecuLEDs are characterized by their ability to provide far less than QD film prices."

The ordinary LCD panel will let the light emitted by the white backlight pass through the RGB (red, green and blue) tri-color filter to emit three primary colors. However, red and green color rendering performance is poor because the peaks of red and green have always been shifted from the wavelengths of the three primary colors. Therefore, quantum dots have attracted much attention recently. By using the wavelength conversion function of the quantum dot, the blue light of the blue LED can be converted to green and red, and light having a peak wavelength close to the three primary colors can be extracted. However, the higher cost is a problem.

According to reports, this material has almost the same performance as quantum dot light conversion materials, but its manufacturing cost is low. MolecuLED will be commercially available by the end of 2015. (Reporter: Middle truth)

Common Speci Made of steel wire, welded gabion box is in different treatment types, such as HDG wire, HDG after manufacturing, powder coating, etc.. Instead of lacing wire in woven gabion, for welded gabion box, each panel is connected by spiral tensile wire to form a box structure. Comparing to woven hexagonal gabion, welded gabion box is more rigid in shape.

 

Material:

Hot dipped galvanized

Galfan coated

Stainless steel wire


Application: Flood dam, dam and diversion, Prevent soil erosion, bridge protection, retaining wall, road protection

Feature: easy to install, beautiful structure, low cost, it is the best choice for garden decoration greening slope.

Common Specifications of Welded Mesh Gabion



 

Normal Box sizes (m)

NO. of diaphragms (pcs)

Galvanized Wire

Gal-fan Coated Wire

Mesh Size

1.0x1.0x0.5

None

3.0/4.0/5.0mm

3.0/4.0/5.0mm

50X50mm

50x100mm

100x100mm

75x75mm

 

1.0x1.0x1.0

None

3.0/4.0/5.0mm

3.0/4.0/5.0mm

1.5x1.0x0.5

None

3.0/4.0/5.0mm

3.0/4.0/5.0mm

1.5x1.0x1.0

None

3.0/4.0/5.0mm

3.0/4.0/5.0mm

2.0x1.0x0.5

1

3.0/4.0/5.0mm

3.0/4.0/5.0mm

2.0x1.0x1.0

1

3.0/4.0/5.0mm

3.0/4.0/5.0mm

3.0x1.0x0.5

2

3.0/4.0/5.0mm

3.0/4.0/5.0mm

3.0x1.0x1.0

2

3.0/4.0/5.0mm

3.0/4.0/5.0mm

4.0x1.0x0.5

3

3.0/4.0/5.0mm

3.0/4.0/5.0mm

4.0x1.0x1.0

3

3.0/4.0/5.0mm

3.0/4.0/5.0mm

 Welded Mesh Gabion


FAQ:

1. How can I get a catalogue?
Please call us or send us email. We will reply within 24 hours.

2. Is customized product available ?
Besides common size, we accept customized fabrication. Just let us know your requirements.

3. How long after I place an order can I expect delivery?
This depends on the product chosen. We will always try to fit in deliveries to meet customer requirements, so if you have a specific details please talk to us. Some of our products are custom made, so will have a longer delivery time, but we can give you an estimated delivery date at the time of placing your order. We aim to complete the majority of deliveries within 15 days.



Welded Mesh Gabion

Welded Gabion Mesh Box,Gabion Retaining Wall,Bastion Barrier

Anping Enzar Metal Products Co.,Ltd. , https://www.enzarmetal.com

This entry was posted in on